EN
Acrel ADL400 3 Phase Din Rail Power Energy Meter MID Electric Meter
● Rated Current: 1 (6) A, 10 (80) A
● Rated Voltage: AC220V/380V, AC230V/400V
● RS485(MODBUS-RTU) Communication
● 12 digits LCD Display; 35mm DIN Rail Installation
● 2~31st Harmonic Measurement
● kWh Class 0.5S
- Overview
- Parameter
- Certificates
- Customer Questions & Answers
- Contact us
ADL400 din rail energy meter adopts DIN35mm din rail installation with LCD display,it can measure electric parameters and has energy pulse output, RS485 communication,which has the advantages of small size, high precision, good reliability and convenient installation.
| project | performance parameter | ||
| Specification | 3 phase 3 wires, 3 phase 4 wires | ||
| Measurement | Voltage | Reference voltage | 3×100V、 3×380V、3×57.7/100V、 3×220/380V |
| Consumption | <10VA(Single phase) | ||
| Impedance | >2MΩ | ||
| Accuracy class | Error±0.2% | ||
| Current | Input current | 3×1(6)A， 3×10(80)A | |
| Consumption | <1VA Single phase rated current | ||
| Accuracy class | Error±0.2% | ||
| Power | Active, reactive, apparent power, error±0.5℅ | ||
| Frequency | 45～65Hz，Error±0.2% | ||
| Metering | Energy | Active energy(Accuracy class: 0.5) reactive energy(Accuracy class 2) | |
| Clock | ≤0.5s/d | ||
| Digit signal | Energy pulse output | 1 active photocoupler output | |
| pulse | Width of pulse | 80±20ms | |
| Pulse constant | 400imp/kWh,10000imp/kWh(Correspond with the basic current) | ||
| communication | Interface and communication protocol | RS485口：Modbus RTURS485：Modbus RTU | |
| Range of communication address | Modbus RTU:1~ 247； | ||
| Baud rate | 1200bps~19200bps | ||
| environment | working temperature | -25℃~+55℃ | |
| Relative humidity | ≤95℅(No condensation) | ||
① Voltage Enter-wire
② Brand
③ Panel
④ Up Button
⑤ Down Button
⑥ Auxiliary function
⑦ Pulse Output
⑧ Model
⑨ Set Button
⑩ CT Enter-wire
Functions
Display
Wiring
| project | performance parameter | ||
| Specification | 3 phase 3 wires, 3 phase 4 wires | ||
| Measurement | Voltage | Reference voltage | 3×100V、 3×380V、3×57.7/100V、 3×220/380V |
| Consumption | <10VA(Single phase) | ||
| Impedance | >2MΩ | ||
| Accuracy class | Error±0.2% | ||
| Current | Input current | 3×1(6)A， 3×10(80)A | |
| Consumption | <1VA Single phase rated current | ||
| Accuracy class | Error±0.2% | ||
| Power | Active, reactive, apparent power, error±0.5℅ | ||
| Frequency | 45～65Hz，Error±0.2% | ||
| Metering | Energy | Active energy(Accuracy class: 0.5) reactive energy(Accuracy class 2) | |
| Clock | ≤0.5s/d | ||
| Digit signal | Energy pulse output | 1 active photocoupler output | |
| pulse | Width of pulse | 80±20ms | |
| Pulse constant | 400imp/kWh,10000imp/kWh(Correspond with the basic current) | ||
| communication | Interface and communication protocol | RS485口：Modbus RTURS485：Modbus RTU | |
| Range of communication address | Modbus RTU:1~ 247； | ||
| Baud rate | 1200bps~19200bps | ||
| environment | working temperature | -25℃~+55℃ | |
| Relative humidity | ≤95℅(No condensation) | ||
-
Download
Manual
Customer Questions & Answers
Did not match any questions!
